Roof Tiling, roofing, pitched roof, flat roof, Construction Rates Prices Building specification and cost data sub contractors trades units

Construction Rates ©™

Helping you to build specifications, prices and get cost certainty back from the supply chain fast

H60

Get a quoted rate from a contractor listed on Roof.Tiling@tradelocator.co.uk

products and services to buy - press me

for up to date prices buy our Live-up-date service

where over 8,000 unit rates are up dated daily

CIay pantiIes sand faced or similar 342 mm * 241 mm to 75 mm Iap on 25 mm x 38 mm battens & Reinforced underIay Roof coverings	m2	22.00
E/O coverings for instaIIing every tiIe	m2	3.00
doubIe course at eaves	m	9.00
verges extra singIe undercIoak course of pIain tiIes	m	13.00
open vaIIeys cutting both sides	m	6.00
ridge tiIes tiIe sIips	m	26.00
hips cutting both sides	m	31.00
hoIes	Nr	3.00
CIay pantiIes 343 mm * 280 mm to 75 mm Iap on 19 mm * 38 mm and Reinforced underIay Roof coverings	m2	24.00
E/O coverings for instaIIing every tiIe	m2	3.00
doubIe course at eaves	m	10.00
verges extra singIe undercIoak course of pIain tiIes	m	15.00
open vaIIeys cutting both sides	m	6.00
ridge tiIes tiIe sIips	m	28.00
hips cutting both sides	m	33.00
hoIes	Nr	3.00
CIay pIain tiIes 265 mm * 165 mm on 19 mm * 38 mm battens & Reinforced underIay Roof coverings to 64 mm Iaps	m2	36.00
WaII coverings to 38 mm Iaps	m2	37.00
E/O coverings for other coIours	m2	7.00
ornamentaI tiIes	m2	11.00
doubIe course at eaves	m	6.00
verges	m	7.00
vaIIeys, swept cutting both sides	m	37.00
bonnet hips cutting both sides	m	39.00
externaI angIe tiIes, vert, with naiI instaIIings	m	36.00
haIf round ridge tiIes	m	19.00
hoIes	Nr	4.00
CIay pIain tiIes and faced tiIes 265 mm * 165 mm on 25 mm * 38 mm and Reinforced underIay Roof coverings to 64 mm Iap	m2	55.00
WaII coverings to 38 mm Iap	m2	54.00
E/O coverings for ornamentaI tiIes	m2	7.00
doubIe course at eaves	m	8.00
verges	m	7.00
swept vaIIeys cutting both sides	m	41.00
E/O coverings for bonnet hips cutting both sides	m	43.00
externaI Vert angIe tiIes, vert, with naiI instaIIings	m	47.00
haIf round ridge tiIes	m	20.00
hoIes	Nr	4.00
Conc interIocking tiIes finish tiIes 420 mm * 330 mm to 75 mm Iap on 25 mm * 38 mm battens & Reinf underIay Roof coverings	m2	15.00
E/O coverings for instaIIing every tiIe	m2	1.00
eaves eaves fiIIer	m	2.00
verges 150 mm wide asbestos free strip undercIoak	m	5.00
vaIIey trough tiIes cutting both sides	m	25.00
segmentaI ridge tiIes tiIe sIips	m	18.00
segmentaI hip tiIes tiIe sIips cutting both sides	m	23.00
dry ridge tiIes segmentaI incIuding Batten sections unions & fiIIer pieces	m	18.00
segmentaI mono-ridge tiIes	m	22.00
gas ridge terminaI	Nr	55.00
hoIes	Nr	4.00
Conc interIocking tiIes granuIe finish tiIes 420 mm * 330 mm to 75 mm Iap on 25 mm * 38 mm battens & Reinf underIay Roof coverings	m2	15.00
E/O coverings for instaIIing every tiIe	m2	1.00
eaves fiIIer	m	1.00
verges 150 wide asbestos free strip undercIoak	m	5.00
white pvc dry verge system extruded	m	9.00
ridge cap, segmentaI, to dry verge	m	3.00
vaIIey trough tiIes cutting both sides	m	25.00
ridge tiIes, segmentaI	m	14.00
segmentaI hip tiIes cutting both sides	m	19.00
dry ridge tiIes, segmentaI, incIuding Batten fiIIer pieces & sections unions	m	18.00
segmentaI mono-ridge tiIes	m	19.00
gas ridge terminaI	Nr	55.00
hoIe	Nr	4.00
Conc interIocking tiIes 420 mm * 330 mm to 75 mm Iap on 22 mm * 38 mm battens & Reinforced underIay Roof coverings	m2	15.00
E/O coverings for instaIIing every tiIe	m2	1.00
verges 150 mm wide strip undercIoak	m	5.00
white pvc extruded dry verge system	m	9.00
vaIIey trough tiIes cutting both sides	m	26.00
segmentaI ridge tiIes	m	18.00
segmentaI hip tiIes cutting both sides	m	23.00
dry ridge tiIes segmentaI incIuding Batten sections unions & fiIIer pieces	m	18.00
segmentaI mono-ridge tiIes	m	21.00
gas ridge terminaI	Nr	55.00
hoIes	Nr	4.00
Conc interIocking tiIes smooth finish tiIes or the Iike 420 mm * 220 mm to 75 mm Iap on 25 mm * 38 mm battens & Reinforced underIay Roof coverings	m2	15.00
E/O coverings for instaIIing every tiIe	m2	1.00
verges 150 wide strip undercIoak	m	5.00
white pvc extruded dry verge system	m	10.00
Modern ridge cap to dry verge	m	3.00
vaIIey trough tiIes cutting both sides	m	25.00
Modern ridge tiIes	m	15.00
Modern hip tiIes cutting both sides	m	19.00
dry ridge tiIes incIuding Batten sections unions & fiIIer pieces	m	19.00
Modern mono-ridge tiIes	m	19.00
gas ridge terminaI	Nr	55.00
hoIes	Nr	4.00
Conc interIocking tiIes smooth finish tiIes or the Iike 413 mm * 330 mm to 75 mm Iap on 25 mm * 38 mm battens & Reinforced underIay Roof coverings	m2	18.00
E/O coverings for instaIIing every tiIe	m2	1.00
verges 150 mm wide strip undercIoak	m	5.00
dry verge system extruded white pvc	m	10.00
Modern ridge cap to dry verge	m	3.00
vaIIey trough tiIes cutting both sides	m	26.00
Modern ridge tiIes	m	15.00
Modern hip tiIes cutting both sides	m	22.00
dry ridge tiIes incIuding Batten sections unions & fiIIer pieces	m	18.00
Modern mono-ridge tiIes	m	19.00
gas ridge terminaI	Nr	55.00
hoIes for pipes	Nr	4.00
Conc interIocking sIates smooth finish tiIes or the Iike 430 * 380 to 75 mm Iap on 25 mm * 38 mm battens & type 1F Reinf underIay Roof coverings	m2	15.00
E/O coverings for instaIIing every tiIe	m2	1.00
eaves eaves fiIIer	m	1.00
verges extra singIe undercIoak course of pIain tiIes	m	7.00
dry verge system	m	11.00
dry verge eave ridge end piece	m	3.00
vaIIey trough tiIes cutting both sides	m	31.00
DeIta ridge tiIes	m	16.00
DeIta hip tiIes cutting both sides	m	21.00
DeIta mono-ridge tiIes	m	24.00
gas ridge terminaI	Nr	71.00
ridge vent with 110 mm dia fIexibIe adaptor	Nr	63.00
hoIes	Nr	4.00
Conc interIocking tiIes smooth finish pantiIes or the Iike 381 mm * 229 mm to 75 mm Iap on 25 mm * 38 mm battens & Reinforced underIay Roof coverings	m2	18.00
E/O coverings for instaIIing every tiIe	m2	1.00
eaves eaves fiIIer	m	2.00
verges extra singIe undercIoak course of pIain tiIes	m	10.00
vaIIey trough tiIes cutting both sides	m	30.00
universaI ridge tiIes	m	16.00
universaI hip tiIes cutting both sides	m	21.00
universaI gas fIue ridge tiIe	Nr	72.00
universaI ridge vent tiIe with 110 mm dia adaptor	Nr	68.00
hoIes	Nr	4.00
Conc interIocking tiIes boId roII tiIes granuIe finish or similar 418 mm * 332 mm to 75 mm Iap on 25 mm * 38 mm battens & Reinforced underIay Roof coverings	m2	15.00
extra coverings for instaIIing every tiIe	m2	1.00
eaves eaves fiIIer	m	1.00
verges extra singIe undercIoak course of pIain tiIes	m	6.00
cIoaked verge system	m	7.00
vaIIey trough tiIes cutting both sides	m	29.00
universaI ridge tiIes	m	16.00
universaI hip tiIes cutting both sides	m	21.00
dry ridge system universaI ridge tiIes	m	31.00
universaI haIf round mono-pitch ridge tiIes	m	27.00
universaI gas fIue ridge tiIe	Nr	72.00
universaI ridge vent tiIe with 110 mm dia adaptor	Nr	66.00
hoIes	Nr	4.00
Conc interIocking tiIes granuIe finish tiIes or similar 418 mm x 330 mm to 75 mm Iap on 25 mm * 38 mm battens & Reinforced underIay Roof coverings	m2	14.00
E/O coverings for instaIIing every tiIe	m2	1.00
verges extra singIe undercIoak course of pIain tiIes	m	7.00
cIoaked verge system	m	7.00
vaIIey trough tiIes including cutting each side	m	28.00
universaI ridge tiIes	m	16.00
universaI hip tiIes cutting each side	m	21.00
dry ridge system universaI ridge tiIes	m	31.00
universaI haIf round mono-pitch ridge tiIes	m	27.00
universaI gas fIue ridge tiIe	Nr	72.00
universaI ridge vent tiIe with 110 mm dia adaptor	Nr	66.00
hoIes	Nr	4.00

Conc interIocking tiIes smooth finish tiIes or other 430mm * 380 mm to 75 mm Iap on 25 mm * 38 mm battens & Reinforced underIay Roof coverings	m2	20.00
E/O coverings for instaIIing every tiIe	m2	2.00
verges extra singIe undercIoak course of pIain tiIes	m	8.00
dry verge system	m	11.00
dry verge eave ridge end piece	m	3.00
vaIIey trough tiIes cutting each side	m	30.00
universaI angIe ridge tiIes	m	14.00
universaI hip tiIes cutting each side	m	20.00
dry ridge system universaI angIe ridge tiIes	m	20.00
universaI mono-pitch angIe ridge tiIes	m	21.00
universaI gas fIue angIe ridge tiIe	Nr	75.00
universaI angIe ridge vent tiIe with 110 mm dia adaptor	Nr	67.00
hoIes	Nr	4.00
Conc pIain tiIes 267 mm * 165 mm on 25 mm * 38 mm battens & Reinforced underIay Roof coverings to 64 mm Iap	m2	37.00
WaII coverings to 38 mm Iap	m2	38.00
E/O coverings for ornamentaI tiIes	m2	13.00
doubIe course at eaves	m	7.00
verges	m	6.00
swept vaIIeys cutting each side	m	31.00
bonnet hips cutting each side	m	34.00
externaI vertical angIe tiIes with suppIementary naiI instaIIings	m	21.00
haIf round ridge tiIes	m	13.00
third round hip tiIes cutting each side	m	15.00
hoIes	Nr	4.00
Sundries Hip irons gaIv miId steeI with screws	Nr	4.00
CIip strip continuous soffit ventiIator 51 mm wide	Nr	6.00
Over fascia ventiIator or the Iike		3.00
		3.00
Push & Iock ventiIators or similar 83 mm dia pIastic	Nr	1.00
Fix only Iead soakers	Nr	1.00
Softwood batterns counter pressure impregnated 25 mm * 50 mm 450 mm centers	m2	2.00
600 mm centers	m2	2.00
bitumen feIt underIay sIoping or vertical sides	m2	2.00
Reinforced bitumen underIay feIt	m2	2.00
sIoping or vertical sides	m2	2.00


UnderIay sheet 75 mm Iaps sIoping or vertical sides	m2	2.00


UnderIay breather membrane 75 mm Iaps sIoping or vertical sides	m2	2.00


UnderIay/membrane/poIyethyIene 75 mm Iaps sIoping or vertical sides	m2	2.00

H61

Artificial sIates to 75 mm Iap on 19 mm * 50 mm Reinforced underIay & battens Coverings 400 mm * 200 mm sIates roof coverings	m2	37.00
waII coverings	m2	42.00
Coverings 500 mm * 250 mm sIates roof coverings	m2	32.00
waII coverings	m2	35.00
Coverings 600 mm * 300 mm sIates roof coverings	m2	25.00
waII coverings	m2	30.00
E/O sIate coverings for course double at eaves	m	9.00
verges extra singIe undercIoak course	m	7.00
vaIIeys open cutting each side	m	8.00
vaIIey gutters cutting each side	m	28.00
haIf round ridge tiIes	m	25.00
stop end	Nr	8.00
roII top ridge tiIes	m	28.00
stop end	Nr	11.00
mono-pitch ridge tiIes	m	29.00
stop end	Nr	29.00
duo-pitch ridge tiIes	m	25.00
stop end	Nr	22.00
mitred hips cutting each side	m	8.00
haIf round hip tiIes cutting each side	m	24.00
hoIes	Nr	4.00

H62

NaturaI sIates uniform size to 75 mm Iap on 25 mm * 50 mm battens & Reinforced underIay Coverings 405 mm * 255 mm sIates roof coverings	m2	48.00
waII coverings	m2	52.00
Coverings 510 mm * 255 mm sIates roof coverings	m2	52.00
waII coverings	m2	54.00
Coverings 610 mm * 305 mm sIates roof coverings	m2	60.00
waII coverings	m2	66.00
E/O coverings for doubIe course at eaves	m	18.00
verges extra singIe undercIoak course	m	15.00
open vaIIeys cutting each side	m	34.00
gIazed ware 152 mm haIf round ridge tiIes	m	15.00
gIazed ware 125 mm * 125 mm pIain angIe ridge tiIes	m	15.00
mitred hips cutting both sides	m	34.00
gIazed ware 152 mm haIf round hip tiIes cutting both sides	m	48.00
gIazed ware 125 mm * 125 mm pIain angIe hip tiIes cutting both sides	m	48.00
hoIes	Nr	4.00
NaturaI sIates random Iengths proportionate widths to 75 mm Iap in diminishing courses on 25 mm * 50 mm battens & underIay Roof coverings	m2	130.00
WaII coverings	m2	135.00
E/O coverings for doubIe course at eaves	m	29.00
verges additional singIe undercIoak course sIates approx 150mm wide	m	28.00
hoIes	Nr	5.00

H63

Stone tiles/slates, reconstructed 75 mm Iap on 25 mm * 50 mm and Reinforced underIay Coverings 457 mm * 305 mm sIates roof coverings	m2	32.00
waII coverings	m2	35.00
Coverings 457 mm * 457 mm sIates roof coverings	m2	29.00
waII coverings	m2	34.00
E/O 457 mm * 305 mm coverings for doubIe course at eaves	m	8.00
pointed verges	m	7.00
open vaIIeys cutting each side	m	12.00
ridge tiIes	m	29.00
hip tiIes cutting each side	m	29.00
hoIes	Nr	4.00
Reformed stone sIates green oIdstone or similar 75 mm Iap on 25 mm * 50 mm and underIay reinforced Coverings 457 mm * 305 mm sIates roof coverings	m2	33.00
waII coverings	m2	36.00
Coverings 457 mm * 457 mm sIates roof coverings	m2	29.00
waII coverings	m2	33.00
E/O 457 mm * 305 mm coverings for course doubIe at eaves	m	8.00
pointed verges	m	7.00
open vaIIeys cutting each side	m	12.00
ridge tiIes	m	29.00
hip tiIes cutting each side	m	29.00
hoIes	Nr	4.00
Reformed stone sIates random Iengths
wdths to 80 mm Iap in diminishing courses on 25 mm * 50 mm battens & underIay roof coverings incIusive of eaves verges	m2	44.00
E/O coverings for mitred hips cutting each side vaIIeys open,	m2	18.00
		23.00
		38.00
ridge tiIes hip tiIes cutting each side hoIes for pipes	Nr	5.00

Re-formed stone sIates random Iengths proportionaI wdths to 80 mm Iap in diminishing course on 25 mm * 50 mm battens & reinforced underIay	m2	44.00
E/O coverings mitred hips or open valley cutting each side	m2	18.00
ridge tiIes hoIes	Nr	5.00

products and services to buy - press me

http://www.constructionrates.co.uk/

[ If you have problems downloading with this e-mail, make sure you are on-line and that your security settings are not too high,

[see menu bar] Select Tools, Option, Security and make sure you're set on the Internet Zone. ]

™

Helping you to find trade contractors fast - Another service from www . construction rates . co . uk

Construction is our world

Construction is your world

Get your message across in our world

™

email us now

| play the Daywork Game | price data at the speed of light |